All-Weather Subterranean Subwoofers
Outdoor Living subwoofer enclosures disappear just below the surface of the ground, with only its unobtrusive “mushroom cap” port visible. The enclosure is constructed of high-density polyethylene, the same material that ensures a long life for underground water systems. This enclosure can withstand flooding rains and wild temperature extremes, and has been successfully tested underwater and in environments from -20°F to 185°F.
The woofer’s low-heat design is vented through the “mushroom cap,” providing a constant flow of fresh air while always protecting the system from harsh weather and water. The flared port system, combined with our polypropylene cone woofer and a high-intensity magnet structure, adds deep, musical bass to the whole area with no chuffing or extraneous vibration. Bury the subwoofer nearby, or install it under your decking, and add a surprisingly vibrant low end to your outdoor entertainment.
Specifications
Specifications are subject to change without notice
Frequency Response
|
33–135Hz ±3dB
|
Recommended Amplifier Power
|
20—800 watts per channel
|
Sensitivity
|
Room: 88 dB, Anechoic: 82 dB
|
Impedance
|
8 ohms Compatible with 4, 6, or 8 Ohm rated amplifiers.
|
Low Frequency Transducer
|
10” (25.4cm) mineral filled poly cone, 2” (5cm) high-power oversized voice coil, 4-layer on fiberglass bobbin
|
Inputs
|
Speaker Wire
|
Weight
|
48 lbs. (21.8 kg)
|
Dimensions barrel only
|
9.8" x 15.8" x 15.8 " (24.9cm x 40cm x 40cm)
|
Dimensions canopy
|
6.1" x 10.3" x 10.3" (15.6 cm x 26.1cm x 26.1cm)
|
Dimensions barrel, pipe, and canopy
|
23.6" x 15.8 " x 18 " (60 cm x 40cm x 45.7 cm)
|